NowAll logoNowAll
Made in the Netherlands · EN 1004 class 3 · TÜV

Rolling towers dealers can rely on.

The complete Euroscaffold and Eurostairs range for dealers and rental companies: rolling towers up to 14 m, stair towers, room scaffolds, scaffold trailers, ladders, spare parts and Roof Safety Systems edge protection.

4 – 14 mWorking heights, rolling and stair towers
75 · 90 · 135cm platform widths
190 · 250 · 305cm platform lengths
5 yearsManufacturer warranty
On site with Euroscaffold

Real jobs, real towers.

The range

Eight product groups, one supplier

Towers, trailers, ladders and parts ship together on mixed pallets. Every component is sold separately, so your customers can extend or repair instead of replacing.

Click any photo to enlarge · open a set to see its full contents

Rolling tower assembly
Rolling tower assembly
Installing the advance guardrail from below
Installing the advance guardrail from below
Rolling tower at work height
Rolling tower at work height
Working safely on a rolling tower
Working safely on a rolling tower
Rolling tower in use
Rolling tower in use
01 · Professional rolling towers

Rolling towers in three lines

Lightweight aluminium towers that go up in minutes. Choose the line by how hard your customers use them.

Working height4.2 – 14.2 m
Width75 / 90 / 135 cm
Length190 / 250 / 305 cm
BasicSemi-professional

Budget series for occasional use, up to 12.2 m working height.

StandardProfessional

High-grade aluminium for everyday trade use, up to 14.2 m.

EuroProfessional

Self-locking Euro pins for the fastest assembly and dismantling, up to 14.2 m.

NEN-EN 1004 class 3EN 1298TÜV
Sets and article numbers
90001Professional 135 × 250, 5.2 m5.2 m
Working height 5.2 mPlatform height 3.2 m
4×Frame 135-28-7
1×Platform 2.50 m with hatch
2×Platform 2.50 m without hatch
2×Double guardrail 2.50 m
4×Diagonal brace 2.50 m
2×Horizontal brace 2.50 m
1×Aluminium toeboard set 2.50 × 1.35 m
4×Castor 200 mm, nylon, double brake, steel spindle
4×Locking clip
90002Professional 135 × 250, 6.2 m6.2 m
Working height 6.2 mPlatform height 4.2 m
4×Frame 135-28-7
2×Frame 135-28-4
2×Platform 2.50 m with hatch
1×Platform 2.50 m without hatch
4×Guardrail 2.50 m
4×Diagonal brace 2.50 m
2×Horizontal brace 2.50 m
1×Aluminium toeboard set 2.50 × 1.35 m
4×Telescopic stabiliser 2.00 m
4×Castor 200 mm, nylon, double brake, steel spindle
8×Locking clip
90006Professional 135 × 250, 10.2 m10.2 m
Working height 10.2 mPlatform height 8.2 m
8×Frame 135-28-7
2×Frame 135-28-4
4×Platform 2.50 m with hatch
1×Platform 2.50 m without hatch
8×Guardrail 2.50 m
4×Diagonal brace 2.50 m
2×Horizontal brace 2.50 m
1×Aluminium toeboard set 2.50 × 1.35 m
4×Telescopic stabiliser 2.00 m
4×Castor 200 mm, nylon, double brake, steel spindle
16×Locking clip
Euroscaffold stair tower on site
Euroscaffold stair tower on site
Stair tower seen from below
Stair tower seen from below
Stepping onto the stair tower
Stepping onto the stair tower
Climbing the stair tower with hands free
Climbing the stair tower with hands free
Non-slip stair treads
Non-slip stair treads
02 · Professional access towers

Stair towers

Rolling towers with stairs built inside the frame. Users climb with both hands free for tools and materials, which makes them the safer choice for sites with frequent climbing.

Working height± 4 – 14 m
Width135 cm
Length250 cm
  • Non-slip stair profile with handrails
  • Expandable with standard tower parts
  • Hop-up bracket for an easier step onto the platform
NEN-EN 1004 class 3EN 1298TÜV
Sets and article numbers
100583Stair tower 135 × 250, 6.2 m6.2 m
Working height 6.2 mPlatform height 4.2 m
3×Frame 135-28-7
1×Walk-through frame 135-28-7 L/R
2×Frame 135-28-4
2×Aluminium stair 60 × 250 cm
2×Inner stair handrail 250 cm
1×Double outer stair handrail 250 cm
1×End handrail with 2 diagonal braces 150 cm
1×Step-on bracket
4×Diagonal brace 250 cm
4×Horizontal brace 250 cm
2×Platform 250 cm without hatch
4×Castor, nylon, aluminium spindle
2×Telescopic stabiliser 200 cm
8×Locking clip
Room scaffold with Ministab stabilisers
Room scaffold with Ministab stabilisers
Working on a room scaffold
Working on a room scaffold
Fitting the Ministab stabiliser
Fitting the Ministab stabiliser
Ministab clamp up close
Ministab clamp up close
Stabiliser foot on the ground
Stabiliser foot on the ground
03 · Professional room scaffolds

Room scaffolds

Compact towers assembled in one piece, for rooms, stairwells, gardens and narrow alleys. Folds small for the van and the storeroom.

Working height± 3 – 8 m
Width75 / 90 / 135 cm
Length150 / 190 cm
  • Extension sets for more working height
  • Platforms with or without hatch, plywood or carbon
  • Footboard for easy entry, garden wheels for rough ground
Sets and article numbers
101278Room scaffold Ready 90 × 190, 3 m3 m
Working height 3 mPlatform height 1 m
1×Folding unit 90 cm, 3 rungs
1×Platform 190 cm without hatch
1×Platform 190 × 30 cm
4×Castor 125 mm
4×Locking clip
100413Extension unit 90 series, 3 rungs+ 1 m
Working height + 1 m
1×Folding extension 90 × 190 cm, 1 m high, anti-slip rungs (locking clips ordered separately)
Euroscaffold scaffolding trailer on site
Euroscaffold scaffolding trailer on site
Trailer loaded with a complete tower
Trailer loaded with a complete tower
Trailer loaded with a tower
Trailer loaded with a tower
Toolbox on the trailer drawbar
Toolbox on the trailer drawbar
Parts stored in the trailer toolbox
Parts stored in the trailer toolbox
04 · Scaffolding trailers

Scaffold trailers

Carry a complete rolling tower in one go and see at a glance that every part is on board. Closed trailers lock with a padlock against theft.

Tower height4 – 12 m closed · 4 – 14 m open
Width75 / 90 / 135 cm
Length190 / 250 / 305 cm
  • Open and closed versions, with or without tower
  • Trailer lock and toolbox as accessories
  • Approved to European trailer legislation
Sets and article numbers
96000Scaffold trailer 250 cm, opentowers up to 14 m
Working height towers up to 14 m
1×Galvanised trailer 360 × 200 × 192 cm
8×Platform slots (190 and 250 cm platforms)
1×13-pin connector
·Unladen 250 kg, payload 750 kg, driving licence B
96001Scaffold trailer 250 cm, lockabletowers up to 14 m
Working height towers up to 14 m
1×Galvanised closed trailer 360 × 200 × 192 cm, padlock ready
8×Platform slots (190 and 250 cm platforms)
1×13-pin connector
·Driving licence B
Three-section Eurostairs ladder against a house
Three-section Eurostairs ladder against a house
Two-section ladder against a house
Two-section ladder against a house
Non-slip rungs up close
Non-slip rungs up close
Single ladder against a wall
Single ladder against a wall
Telescopic ladder with carry strap
Telescopic ladder with carry strap
05 · Eurostairs professional ladders

Ladders

For jobs where a rolling tower does not fit. Lightweight aluminium with wide 4 cm rungs.

Single ladders1×6 – 1×28 rungs

Placed against a facade or wall, straight or outward bend.

Two-section ladders2×6 – 2×18

Extension ladder or A-position; retracts for storage.

Three-section ladders3×7 – 3×14

Extension or free-standing A-position with adjustable top section.

EN 131NEN 2484
Standing on the platform stairs
Standing on the platform stairs
Climbing Eurostairs double stairs
Climbing Eurostairs double stairs
Eurostairs step detail
Eurostairs step detail
Double stairs hinge and handrail detail
Double stairs hinge and handrail detail
Videos
Eurostairs platform stairs
Eurostairs double stairs
06 · Eurostairs professional stairs

Platform and double stairs

Built for painters, plasterers, installers and facade workers who use them every day. Hinges that protect fingers, dirt-repellent coating and non-slip steps.

Platform stairs1×2 – 1×12 steps

One-sided with integrated toolbox at the top.

Double stairs2×2 – 2×12 steps

Accessible from both sides, extra-wide 10 cm steps, detachable handrail.

EN 131NEN 2484
Wall stand-off fixed to a rolling tower
Wall stand-off fixed to a rolling tower
Weather tent on a rolling tower
Weather tent on a rolling tower
Wall anchor with coupler
Wall anchor with coupler
Work bridge hook detail
Work bridge hook detail
Scaffold bumper on a castor
Scaffold bumper on a castor
07 · Parts & accessories

Parts that keep towers in service

Every frame, brace, platform and castor is available on its own, which rental fleets and trade customers expect.

  • Front handrails: single, double or Vario (adjustable up to 305 cm) for edge protection during assembly
  • Platform floors: concrete plywood or lightweight carbon, with or without hatch
  • Frames, horizontal and diagonal braces, stabilisers, castors 125 and 200 mm
  • Wall anchors, wall stand-offs, scaffold bumpers, work bridges and a weather tent
08 · Roof Safety Systems

Roof edge protection

Temporary fall protection by Roof Safety Systems (NL) for roofers, installers and solar crews, for both sloping and flat roofs.

RSS Sloping Roof

Edge protection for pitched roofs.

Watch the video
RSS Flat Roof Classic

Guardrail system for flat roofs.

Watch the video
RSS Flat Roof Compact

Compact flat-roof edge protection.

Watch the video
Roof Shelter

Weather protection over the work area.

Product page
For dealers and rental companies

Why dealers add Euroscaffold

Premium quality with dealer margin

Dutch-built towers in the same class as the leading European brands, priced so you keep a healthy margin on every sale.

Full system on one order

Towers, stair towers, room scaffolds, trailers, ladders and parts from one supplier. Mixed pallets are fine.

5-year warranty and inspection service

Towers come with a 5-year manufacturer warranty. Inspections can be done by certified inspectors on site or at the factory.

Direct contact, fast answers

You deal with one person who knows your orders and your market. We aim to answer every request within one working day.

The factory

Built in the Zaanstreek, the Netherlands

Euroscaffold has made aluminium climbing equipment for over a decade, from about 10,000 m² of production and distribution space with a showroom that keeps the full range in stock. Custom work such as fixed ladders is possible on request.

Euroscaffold building in the Zaanstreek
Production process

From aluminium tube to finished frame

  1. Aluminium tubes and profiles
    Aluminium tubes and profiles

    Frames start as round aluminium tubes and ribbed rung profiles.

  2. Claws and couplers
    Claws and couplers

    Cast claws, couplers and brackets are prepared for braces and frames.

  3. Robot welding
    Robot welding

    Welding robots join the rungs to the uprights of each frame.

  4. Manual welding
    Manual welding

    Welders join frames and parts by hand where a robot is not used.

  5. Assembly
    Assembly

    Frames, platforms and parts are assembled and prepared for shipping.

  6. Stock and dispatch
    Stock and dispatch

    Finished towers and parts are kept in stock in the Zaanstreek and leave on mixed pallets.

Welded frames ready for finishingRobot welding cellWelder at workCast aluminium bracketsRibbed rung profilesPreparing frames in the hallFrame rungs close upAluminium tubes on a cartPlatforms and frames in stockLoading dock
Videos

See the towers go up

Open the YouTube channel

Every product group above has its own installation videos.

Certified quality

Built and tested to European standards

NEN-EN 1004 class 3EN 1298TÜVEN 131NEN 2484

Rolling and stair towers: NEN-EN 1004 class 3 and EN 1298, TÜV certified.

Ladders and stairs: EN 131 and NEN 2484.

5-year manufacturer warranty on towers; inspections by certified inspectors on site or at the factory.

FAQ

Questions dealers ask first

Which standards do the products meet?

Rolling and stair towers are built to NEN-EN 1004 class 3 and EN 1298 and are TÜV certified. Eurostairs ladders and stairs meet EN 131 and NEN 2484.

What warranty do I get?

Towers come with a 5-year manufacturer warranty. Inspections can be done by certified inspectors on site or at the factory.

Can I order single spare parts?

Yes. Every frame, brace, platform, stabiliser and castor is sold separately, so towers can be extended or repaired instead of replaced.

How are orders delivered?

By truck from the Netherlands. Towers, trailers, ladders and parts can be combined on mixed pallets. Sea freight is possible on request. We confirm the lead time with every quote.

How do I become a dealer?

Send the dealer form below or call us. We reply with a dealer price list and a first quote for the products you ask about. We work with one or two strong partners per country.

Become a dealer

Tell us what you sell and we will send prices

Send the form or write directly. We reply with a dealer price list and a first quote for the products you ask about.

Contact
Lucjan Urniaż
Phone
+48 602 106 999
E-mail
lucjan.urniaz@nowall.pl
Office
+48 600 986 015 · contact@nowall.pl